新闻资讯

New center

Check category
/
/
/
Wholesale Die casting processing products

Wholesale Die casting processing products

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-26 14:38
  • Views:

(Summary description)Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content.

Wholesale Die casting processing products

(Summary description)Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-26 14:38
  • Views:

How much do you know about die casting? Let's follow the Wholesale Die casting processing products editor for a brief understanding!
1. Hot chamber die casting
Hot chamber die casting, sometimes referred to as gooseneck die casting, involves a pool of molten, semi-liquid metal that fills a mold under pressure. At the start of the cycle, the machine's piston is retracted, allowing molten metal to fill the gooseneck. A pneumatic or hydraulic piston squeezes the metal and fills it into a die. The advantages of this system include high cycle speed (approximately 15 cycles per minute), ease of automation, and ease of melting the metal. Disadvantages include the inability to die-cast metals with higher melting points, as well as the inability to die-cast aluminum, which would carry iron out of the molten pool. Thus, hot chamber die casting machines are generally used for alloys of zinc, tin and lead. Moreover, hot chamber die casting is difficult to use for die casting large castings, which are usually die casting of small castings.

Wholesale Die casting processing products
2. Cold chamber die casting
Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content. In this process, the metal needs to be melted first in a separate crucible. A quantity of molten metal is then transferred to an unheated injection chamber or nozzle. These metals are injected into the mold by hydraulic or mechanical pressure. The biggest disadvantage of this process is the long cycle time due to the need to transfer the molten metal into the cold chamber. Cold chamber die-casting machines are also divided into vertical and horizontal types. Vertical die-casting machines are usually small machines, while horizontal die-casting machines have various models.
The above is the editor of Wholesale Die casting processing products: a brief introduction to some knowledge about die casting.

Keyword:

推荐新闻

Several Factors Affecting Die Casting Process
Several Factors Affecting Die Casting Process
Time of issue : 2022-09-01 15:03:48
Due to the high melting point of some alloys, the service life of the matching die-casting mold is too low and the cost is high, which is difficult to apply in actual production.
See more information
Due to the high melting point of some alloys, the service life of the matching die-casting mold is too low and the cost is high, which is difficult to apply in actual production.
What are the reasons for the damage of the die casting mold
What are the reasons for the damage of the die casting mold
Some mold shells only produce dozens of mold shells, so there will be gaps. Although it is very likely that only external specifications are ensured during forging,
See more information
Some mold shells only produce dozens of mold shells, so there will be gaps. Although it is very likely that only external specifications are ensured during forging,
How to repair the scratch of the aluminum alloy shell
How to repair the scratch of the aluminum alloy shell
Due to the improper design of the stamping die: the pressure injury caused by the die itself; the die is too tight, the parts need to be pryed, and the gap caused by the prying.
See more information
Due to the improper design of the stamping die: the pressure injury caused by the die itself; the die is too tight, the parts need to be pryed, and the gap caused by the prying.
Previous page
1
2
12

Foshan Nanhai Jiawei metal products Co., Ltd

Contact information:18928682636(Miss Liang)/18928682621(Mr. Tang)

Company phone:0757-85103282

Company fax:0757-85103183

Company email:sunny@nhjiawei.com / jia_tangvic@163.com

Marketing Center: No.90, hongganglihe Road, Lishui Town, Nanhai District, Foshan City

Production base: b3-1, zone 3, Enping Industrial Park, Jiangmen industrial transfer park (Enping Guangen profile Co., Ltd.)

language
中国
韩国
韩国
韩国
韩国
韩国
Copyright ? 2021 Foshan Nanhai Jiawei metal products Co., Ltd 粤ICP备19125561号 Powerby :300.cn 
XML 地图 | Sitemap 地图