新闻资讯

New center

Check category
/
/
/
Ingate knowledge of Die casting processing in china

Ingate knowledge of Die casting processing in china

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-19 08:26
  • Views:

(Summary description)After the molten metal enters the mold, the parting surface should not be closed immediately, and the overflow groove and the exhaust groove should not directly impact the mold core. The flow direction of the molten metal after entering the mold is as far as possible along the cast ribs and heat sinks, filling from the thick wall to the thin wall, etc.

Ingate knowledge of Die casting processing in china

(Summary description)After the molten metal enters the mold, the parting surface should not be closed immediately, and the overflow groove and the exhaust groove should not directly impact the mold core. The flow direction of the molten metal after entering the mold is as far as possible along the cast ribs and heat sinks, filling from the thick wall to the thin wall, etc.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-19 08:26
  • Views:

How much do you know about the gate knowledge of die casting? Let's follow the editor of Die casting processing in china for a brief understanding!
1. After the molten metal enters the mold, the parting surface should not be closed immediately, and the overflow groove and the exhaust groove should not impact the mold core directly. The flow direction of the molten metal after entering the mold is as far as possible along the cast ribs and heat sinks, filling from the thick wall to the thin wall, etc.

Die casting processing in china
2. When selecting the position of the inner gate, make the flow of the molten metal as short as possible. When using multi-strand inner gates, it is necessary to prevent several strands of molten metal from converging and impacting each other after molding, resulting in defects such as eddy current slug and oxidation inclusions.
3. The thickness of the inner gate of the thin-walled part should be appropriately smaller to ensure the necessary filling speed, and the setting of the inner gate should be easy to remove, and the casting body should not be damaged.
The above is what Die casting processing in china tells: a brief introduction to the knowledge of the inner gate of die casting.

Keyword:

推荐新闻

Several Factors Affecting Die Casting Process
Several Factors Affecting Die Casting Process
Time of issue : 2022-09-01 15:03:48
Due to the high melting point of some alloys, the service life of the matching die-casting mold is too low and the cost is high, which is difficult to apply in actual production.
See more information
Due to the high melting point of some alloys, the service life of the matching die-casting mold is too low and the cost is high, which is difficult to apply in actual production.
What are the reasons for the damage of the die casting mold
What are the reasons for the damage of the die casting mold
Some mold shells only produce dozens of mold shells, so there will be gaps. Although it is very likely that only external specifications are ensured during forging,
See more information
Some mold shells only produce dozens of mold shells, so there will be gaps. Although it is very likely that only external specifications are ensured during forging,
How to repair the scratch of the aluminum alloy shell
How to repair the scratch of the aluminum alloy shell
Due to the improper design of the stamping die: the pressure injury caused by the die itself; the die is too tight, the parts need to be pryed, and the gap caused by the prying.
See more information
Due to the improper design of the stamping die: the pressure injury caused by the die itself; the die is too tight, the parts need to be pryed, and the gap caused by the prying.
Previous page
1
2
12

Foshan Nanhai Jiawei metal products Co., Ltd

Contact information:18928682636(Miss Liang)/18928682621(Mr. Tang)

Company phone:0757-85103282

Company fax:0757-85103183

Company email:sunny@nhjiawei.com / jia_tangvic@163.com

Marketing Center: No.90, hongganglihe Road, Lishui Town, Nanhai District, Foshan City

Production base: b3-1, zone 3, Enping Industrial Park, Jiangmen industrial transfer park (Enping Guangen profile Co., Ltd.)

language
中国
韩国
韩国
韩国
韩国
韩国
Copyright ? 2021 Foshan Nanhai Jiawei metal products Co., Ltd 粤ICP备19125561号 Powerby :300.cn 
XML 地图 | Sitemap 地图